Unravelling the Links between Phage Adsorption and Successful Infection in Clostridium difficile.

Bacteriophage (phage) therapy is a promising alternative to antibiotics for the treatment of bacterial pathogens, including Clostridiumdifficile. However, as for many species, in C. difficile the physical interactions between phages and bacterial cells have not been studied in detail. The initial interaction, known as phage adsorption, is initiated by the reversible attachment of phage tail fibers to bacterial cell surface receptors followed by an irreversible binding step. Therefore binding can dictate which strains are infected by the phage. In this study, we investigated the adsorption rates and irreversible binding of three C. difficile myoviruses: CDHM1, CDHM3 and CDHM6 to ten strains that represent ten prevalent C. difficile ribotypes, regardless of their ability to infect. CDHM1 and CDHM3 phage particles adsorbed by ~75% to some strains that they infected. The infection dynamics for CDHM6 are less clear and ~30% of the phage particles bound to all strains, irrespective of whether a successful infection was established. The data highlighted adsorption is phage-host specific. However, it was consistently observed that irreversible binding had to be above 80% for successful infection, which was also noted for another two C. difficile myoviruses. Furthermore, to understand if there is a relationship between infection, adsorption and phage tail fibers, the putative tail fiber protein sequences of CDHM1, CDHM3 and CDHM6 were compared. The putative tail fiber protein sequence of CDHM1 shares 45% homology at the amino acid level to CDHM3 and CDHM6, which are identical to each other. However, CDHM3 and CDHM6 display differences in adsorption, which highlights that there is no obvious relationship between putative tail fiber sequence and adsorption. The importance of adsorption and binding to successful infection is often overlooked, and this study provides useful insights into host-pathogen interactions within this phage-pathogen system.

Contractile injection systems of bacteriophages and related systems.

Contractile tail bacteriophages, or myobacteriophages, use a sophisticated biomolecular structure to inject their genome into the bacterial host cell. This structure consists of a contractile sheath enveloping a rigid tube that is sharpened by a spike-shaped protein complex at its tip. The spike complex forms the centerpiece of a baseplate complex that terminates the sheath and the tube. The baseplate anchors the tail to the target cell membrane with the help of fibrous proteins emanating from it and triggers contraction of the sheath. The contracting sheath drives the tube with its spiky tip through the target cell membrane. Subsequently, the bacteriophage genome is injected through the tube. The structural transformation of the bacteriophage T4 baseplate upon binding to the host cell has been recently described in near-atomic detail. In this review we discuss structural elements and features of this mechanism that are likely to be conserved in all contractile injection systems (systems evolutionary and structurally related to contractile bacteriophage tails). These include the type VI secretion system (T6SS), which is used by bacteria to transfer effectors into other bacteria and into eukaryotic cells, and tailocins, a large family of contractile bacteriophage tail-like compounds that includes the P. aeruginosa R-type pyocins.

Phage Tail-Like Bacteriocins.

Many dsDNA bacterial viruses (bacteriophages/phages) have long tail structures that serve as organelles for DNA delivery to host targets. These structures, particularly those of Myoviridae and Siphoviridae phages, have an evolutionary relationship with other cellular biological entities that share the common function of penetrating the bacterial envelope. Among these are type VI secretion systems, insecticidal protein complexes, and bacteriocins. Phage tail-like bacteriocins (PTLBs) are widespread in bacteria, comprising different types that likely evolved independently. They can be divided into two major classes: the R-type PTLBs, which are related to contractile Myoviridae phage tails, and the F-type PTLBs, which are related to noncontractile Siphoviridae phage tails. This review provides an overview of the history, biology, and diversity of these entities and also covers recent efforts to utilize these potent bactericidal agents as human therapeutics against bacterial disease.

Marine tubeworm metamorphosis induced by arrays of bacterial phage tail-like structures.

Many benthic marine animal populations are established and maintained by free-swimming larvae that recognize cues from surface-bound bacteria to settle and metamorphose. Larvae of the tubeworm Hydroides elegans, an important biofouling agent, require contact with surface-bound bacteria to undergo metamorphosis; however, the mechanisms that underpin this microbially mediated developmental transition have been enigmatic. Here, we show that a marine bacterium, Pseudoalteromonas luteoviolacea, produces arrays of phage tail-like structures that trigger metamorphosis of H. elegans. These arrays comprise about 100 contractile structures with outward-facing baseplates, linked by tail fibers and a dynamic hexagonal net. Not only do these arrays suggest a novel form of bacterium-animal interaction, they provide an entry point to understanding how marine biofilms can trigger animal development.

The tip of the tail needle affects the rate of DNA delivery by bacteriophage P22.

The P22-like bacteriophages have short tails. Their virions bind to their polysaccharide receptors through six trimeric tailspike proteins that surround the tail tip. These short tails also have a trimeric needle protein that extends beyond the tailspikes from the center of the tail tip, in a position that suggests that it should make first contact with the host's outer membrane during the infection process. The base of the needle serves as a plug that keeps the DNA in the virion, but role of the needle during adsorption and DNA injection is not well understood. Among the P22-like phages are needle types with two completely different C-terminal distal tip domains. In the phage Sf6-type needle, unlike the other P22-type needle, the distal tip folds into a "knob" with a TNF-like fold, similar to the fiber knobs of bacteriophage PRD1 and Adenovirus. The phage HS1 knob is very similar to that of Sf6, and we report here its crystal structure which, like the Sf6 knob, contains three bound L-glutamate molecules. A chimeric P22 phage with a tail needle that contains the HS1 terminal knob efficiently infects the P22 host, Salmonella enterica, suggesting the knob does not confer host specificity. Likewise, mutations that should abrogate the binding of L-glutamate to the needle do not appear to affect virion function, but several different other genetic changes to the tip of the needle slow down potassium release from the host during infection. These findings suggest that the needle plays a role in phage P22 DNA delivery by controlling the kinetics of DNA ejection into the host.

A balanced ratio of proteins from gene G and frameshift-extended gene GT is required for phage lambda tail assembly.

In bacteriophage λ, the overlapping open reading frames G and T are expressed by a programmed translational frameshift similar to that of the gag-pol genes of many retroviruses to produce the proteins gpG and gpGT. An analogous frameshift is widely conserved among other dsDNA tailed phages in their corresponding "G" and "GT" tail genes even in the absence of detectable sequence homology. The longer protein gpGT is known to be essential for tail assembly, but the requirement for the shorter gpG remained unclear because mutations in gene G affect both proteins. A plasmid system that can direct the efficient synthesis of tails was created and used to show that gpG and gpGT are both essential for correct tail assembly. Phage complementation assays under conditions where levels of plasmid-expressed gpG or gpGT could be altered independently revealed that the correct molar ratio of these two related proteins, normally determined by the efficiency of the frameshift, is also crucial for efficient assembly of functional tails. Finally, the physical connection between the G and T domains of gpGT, a consequence of the frameshift mechanism of protein expression, appears to be important for efficient tail assembly.

Phage T5 straight tail fiber is a multifunctional protein acting as a tape measure and carrying fusogenic and muralytic activities.

We report a bioinformatic and functional characterization of Pb2, a 121-kDa multimeric protein that forms phage T5 straight fiber and is implicated in DNA transfer into the host. Pb2 was predicted to consist of three domains. Region I (residues 1-1030) was mainly organized in coiled coil and shared features of tape measure proteins. Region II (residues 1030-1076) contained two alpha-helical transmembrane segments. Region III (residues 1135-1148) included a metallopeptidase motif. A truncated version of Pb2 (Pb2-Cterm, residues 964-1148) was expressed and purified. Pb2-Cterm shared common features with fusogenic membrane polypeptides. It formed oligomeric structures and inserted into liposomes triggering their fusion. Pb2-Cterm caused beta-galactosidase release from Escherichia coli cells and in vitro peptidoglycan hydrolysis. Based on these multifunctional properties, we propose that binding of phage T5 to its receptor triggers large conformational changes in Pb2. The coiled coil region would serve as a sensor for triggering the opening of the head-tail connector. The C-terminal region would gain access to the host envelope, permitting the local degradation of the peptidoglycan and the formation of the DNA pore by fusion of the two membranes.

Structural characterization and assembly of the distal tail structure of the temperate lactococcal bacteriophage TP901-1.

The tail structures of bacteriophages infecting gram-positive bacteria are largely unexplored, although the phage tail mediates the initial interaction with the host cell. The temperate Lactococcus lactis phage TP901-1 of the Siphoviridae family has a long noncontractile tail with a distal baseplate. In the present study, we investigated the distal tail structures and tail assembly of phage TP901-1 by introducing nonsense mutations into the late transcribed genes dit (orf46), tal(TP901-1) (orf47), bppU (orf48), bppL (orf49), and orf50. Transmission electron microscopy examination of mutant and wild-type TP901-1 phages showed that the baseplate consisted of two different disks and that a central tail fiber is protruding below the baseplate. Evaluation of the mutant tail morphologies with protein profiles and Western blots revealed that the upper and lower baseplate disks consist of the proteins BppU and BppL, respectively. Likewise, Dit and Tal(TP901-1) were shown to be structural tail proteins essential for tail formation, and Tal(TP901-1) was furthermore identified as the tail fiber protein by immunogold labeling experiments. Determination of infection efficiencies of the mutant phages showed that the baseplate is fundamental for host infection and the lower disk protein, BppL, is suggested to interact with the host receptor. In contrast, ORF50 was found to be nonessential for tail assembly and host infection. A model for TP901-1 tail assembly, in which the function of eight specific proteins is considered, is presented.

Isolation of lactococcal prolate phage-phage recombinants by an enrichment strategy reveals two novel host range determinants.

Virulent lactococcal prolate (or c2-like) phages are the second most common phage group that causes fermentation failure in the dairy industry. We have mapped two host range determinants in two lactococcal prolate phages, c2 and 923, for the host strains MG1363 and 112. Each phage replicates on only one of the two host strains: c2 on MG1363 and 923 on 112. Phage-phage recombinants that replicated on both strains were isolated by a new method that does not require direct selection but rather employs an enrichment protocol. After initial mixed infection of strain 112, two rotations, the first of which was carried out on strain MG1363 and the second on 112, permitted continuous amplification of double-plating recombinants while rendering one of the parent phages unamplified in each of the two rotations. Mapping of the recombination endpoints showed that the presence of the N-terminal two-thirds of the tail protein L10 of phage c2 and a 1,562-bp cosR-terminal fragment of phage 923 genome overcame blocks of infection in strains MG1363 and 112, respectively. Both infection inhibition mechanisms act at the stage of DNA entry; in strain MG1363, the infection block acts early, before phage DNA enters the cytoplasm, and in strain 112, it acts late, after most of the DNA has entered the cell but before it undergoes cos-end ligation. These are the first reported host range determinants in bacteriophage of lactic acid bacteria required for overcoming inhibition of infection at the stage of DNA entry and cos-end ligation.

Structure of the cell-puncturing device of bacteriophage T4.

Bacteriophage T4 has a very efficient mechanism for infecting cells. The key component of this process is the baseplate, located at the end of the phage tail, which regulates the interaction of the tail fibres and the DNA ejection machine. A complex of gene product (gp) 5 (63K) and gp27 (44K), the central part of the baseplate, is required to penetrate the outer cell membrane of Escherichia coli and to disrupt the intermembrane peptidoglycan layer, promoting subsequent entry of phage DNA into the host. We present here a crystal structure of the (gp5-gp27)3 321K complex, determined to 2.9 A resolution and fitted into a cryo-electron microscopy map at 17 A resolution of the baseplate-tail tube assembly. The carboxy-terminal domain of gp5 is a triple-stranded beta-helix that forms an equilateral triangular prism, which acts as a membrane-puncturing needle. The middle lysozyme domain of gp5, situated on the periphery of the prism, serves to digest the peptidoglycan layer. The amino-terminal, antiparallel beta-barrel domain of gp5 is inserted into a cylinder formed by three gp27 monomers, which may serve as a channel for DNA ejection.

Identification of a protein binding site on the surface of the alphavirus nucleocapsid and its implication in virus assembly.

BACKGROUND: Many enveloped viruses exit cells by budding from the plasma membrane. The driving force for budding is the interaction of an inner protein nucleocapsid core with transmembrane glycoprotein spikes. The molecular details of this process are ill defined. Alphaviruses, such as Sindbis virus (SINV) and Semliki Forest virus (SFV), represent some of the simplest enveloped viruses and have been well characterized by structural, genetic and biochemical techniques. Although a high-resolution structure of an alphavirus has not yet been attained, cryo-electron microscopy (cryo-EM) has been used to show the multilayer organization at 25 A resolution. In addition, atomic resolution studies are available of the C-terminal domain of the nucleocapsid protein and this has been modeled into the cryo-EM density. RESULTS: A recombinant form of Sindbis virus core protein (SCP) was crystallized and found to diffract much better than protein extracted from the virus (2.0 A versus 3.0 A resolution). The new structure showed that amino acids 108 to 111 bind to a specific hydrophobic pocket in neighboring molecules. Re-examination of the structures derived from virus-extracted protein also showed this 'N-terminal arm' binding to the same hydrophobic pocked in adjacent molecules. It is proposed that the binding of these capsid residues into the hydrophobic pocket of SCP mimics the binding of E2 (one of two glycoproteins that penetrate the lipid bilayer of the viral envelope) C-terminal residues in the pocket. Mutational studies of capsid residues 108 and 110 confirm their role in capsid assembly. CONCLUSIONS: Structural and mutational analyses of residues within the hydrophobic pocket suggest that budding results in a switch between two conformations of the capsid hydrophobic pocket. This is the first description of a viral budding mechanism in molecular detail.

Bacteriophage T4 host range is expanded by duplications of a small domain of the tail fiber adhesin.

The adsorption specificity of T4 is determined by the tip of the gene 37 tail fibers which bind to receptors on the bacterial surface. T4 infects only Escherichia coli and closely related Shigella species, but rare host range mutants can be isolated that infect Yersinia pseudotuberculosis I, an evolutionally distant bacterium. Some of these mutations result in amino acid residue substitutions in the C-terminal portion of gene 37, but others involve unequal exchanges between a series of sequence motifs (His boxes) in the same region. The duplication or mutational alteration of this segment apparently suffices for phage adsorption to a Yersinia receptor. It is suggested that recombination between the His box sequences can generate diversity in phage host range by shuffling receptor recognition domains.

In vitro assembly of infectious virions of double-stranded DNA phage phi 29 from cloned gene products and synthetic nucleic acids.

Up to 6 x 10(7) PFU of infectious virions of the double-stranded DNA bacteriophage phi 29 per ml were assembled in vitro, with 11 proteins derived from cloned genes and nucleic acids synthesized separately. The genomic DNA-gp3 protein conjugate was efficiently packaged into a purified recombinant procapsid with the aid of a small viral RNA (pRNA) transcript, a DNA-packaging ATPase (gp16), and ATP. The DNA-filled capsids were subsequently converted into infectious virions after the addition of four more recombinant proteins for neck and tail assembly. Electron microscopy and genome restriction mapping confirmed the identity of the infectious phi 29 virions synthesized in this system. A nonstructural protein, gp13, was indispensable for the assembly of infectious virions. The overproduced tail protein gp9 was present in solution in mostly dimeric form and was purified to homogeneity. The purified gp9 was biologically active for in vitro phi 29 assembly. Higher-order concentration dependence of in vitro phi 29 assembly on gp9 suggests that a complete tail did not form before attaching to the DNA-filled capsid, a result contrary to earlier findings for phages T4 and lambda. The work described here constitutes an extremely sensitive assay system for the analysis of components in phi 29 assembly and dissection of functional domains of structural components, enzymes, and pRNA (C.-S. Lee and P. Guo, Virology 202:1039-1042, 1995). Efficient packaging of foreign DNA in vitro and synthesis of viral particles from recombinant proteins facilitate the development of phi 29 as an in vivo gene delivery system. The finding that purified tail protein was able to incorporate into infectious virions might allow the construction of chimeric phi 29 carrying a tail fused to ligands for specific receptor of human cells.

Assembly of functional bacteriophage lambda virions incorporating C-terminal peptide or protein fusions with the major tail protein.

The tolerance of bacteriophage lambda morphogenesis for C-terminal additions to the tail tube major protein subunit (the V gene product; gpV) has been investigated. A second modified copy of the lambda V gene, either within a novel phage vector itself or plasmid-borne, was expressed during phage growth. High-level substitution of wild-type gpV by modified gpV bearing a basic C-terminal peptide sequence (RRASV; a target site for cAMP-dependent protein kinase) was possible using multiple repeats of a serine-glycine (SGGG) linker sequence. Highly purified phage bearing copies of gpV-RRASV could be efficiently phosphorylated by the appropriate protein kinase, and the incorporated label was shown to migrate exclusively at the expected size in protein gels. A large tetrameric protein (beta-galactosidase) could be incorporated into active virions in at least one copy, again using a Ser-Gly linker. These studies suggest that with a suitable spacing linker and controlled levels of expression, it is likely that a wide range of protein or peptide substitutents can be fused with gpV at its C terminus and assembled as component subunits of the tail tube.